- 非IC关键词
企业档案
产品分类
- 逻辑IC(1)
- 双向可控硅(晶闸管)(2)
- 可控硅(晶闸管)模块(2)
- 功率电感(1)
- 密封式电位器(1)
- 光电/光敏传感器(8)
- 光学传感器(6)
- 电磁传感器(2)
- 磁敏传感器(1)
- 霍尔传感器(1)
- 电流(压)传感器(6)
- 电量传感器(1)
- 电场传感器(1)
- 电导率传感器(1)
- 压电传感器(4)
- 温(湿)度传感器(57)
- 声波/声敏传感器(1)
- 光纤/激光传感器(10)
- 测距/距离传感器(13)
- 视觉/图像传感器(18)
- 微波传感器(1)
- 光栅(幕)传感器(1)
- 压力传感器(157)
- 力敏传感器(4)
- 称重传感器(18)
- 测力/力矩/扭矩传感器(40)
- 速度传感器(5)
- 加速度传感器(31)
- 气体/气敏/烟雾传感器(100)
- 液位传感器(10)
- 物(料)位传感器(7)
- 振动/接近/位移传感器(108)
- 线性传感器(2)
- 流量传感器(14)
- 风速/风向/风量传感器(1)
- 角度/倾角传感器(13)
- 色标/颜色传感器(1)
- 火焰(警)传感器(3)
- 旋转传感器(1)
- 位置传感器(2)
- 长度传感器(1)
- 陀螺仪(2)
- 其他传感器(126)
- 其他变压器(1)
- 其它逆变器(1)
- 放大器(31)
- 其他扬声器(1)
- 其它电声(扬声器)配件(2)
- 光纤/光缆(3)
- 光/光纤衰减器(2)
- 光纤收发器(1)
- 光纤分支/分路/分配器(1)
- 光纤适配器(2)
- 光纤藕合器(1)
- 光纤网卡(1)
- 激光头(1)
- 激光器(9)
- 其他光电子、激光器件(8)
- 字符/字段/图形点阵LCD液晶显示模块(屏)(3)
- TFT LCD液晶显示屏(模块)(4)
- VFD荧光显示模块(屏)(2)
- 触摸屏(34)
- DLP光显屏(组件)(1)
- 其他显示器件(5)
- 门禁考勤系统(1)
- PCB板卡(1)
- 万用表/多用电表(4)
- 毫欧/毫伏表(1)
- 兆欧表(摇表)(1)
- 电桥(1)
- 衰减器(3)
- 示波器(12)
- 高(耐)压/绝缘测试仪(3)
- 信号发生器/信号源模块(4)
- 功率计(8)
- 功率分析仪(2)
- 光功率计(5)
- 亮度/照度计(1)
- 噪声系数测试/分析仪(1)
- 阻抗分析仪(1)
- 频谱分析仪(2)
- 网络分析仪(4)
- 网络测试仪(2)
- 表面/接地/绝缘电阻测试仪(20)
- 综合测试/分析仪(1)
- 电磁兼容(EMC)测量仪器(1)
- 点温计(1)
- 测量探头及附(配)件(159)
- 其它电子测量仪器(134)
- 其他试验设备(2)
- 静电消除器(棒/机)(1)
- 五金/工具(35)
- 其他(122)
美国Megger TDR1000/3 TDR 电缆故障定位器, 5000m
TDR1000/3 TDR 电缆故障定位器
Megger
0-5000m
39940.0
相关产品
产品信息
Megger TDR 1000/3P 电缆故障定位仪,0-5000m
技术参数
分辨率 1 %
型号(P) TDR1000/3P
宽度 48mm
尺寸 115 x 48 x 230mm
显示器类型 LCD
工作温度 -15°C
脉冲宽度 2ns
范围 5000m
脉冲宽度 4000ns
工作温度 +50°C
电池寿命 14 h
电池类型 AA
电源 电池
电缆类型 金属电缆对
脉冲幅度 5V Pk-Pk
输出阻抗 100 Ω, 25 Ω, 50 Ω, 75 Ω
速度因子/传播速度 0.99
重量 0.6kg
长度 115mm
高度 230mm
Megger TDR 1000/3PThe TDR1000/3P is a hand held, compact Time Domain Reflectometer for locating faults on metallic cables. It has a minimum resolution of 0.1 m/0.3 ft and a 5 km/15 kft maximum range depending on velocity factor selected and cable type.
Four output impedances are available (25, 50, 75, and 100 Ω) and a velocity factor between 0.2 and 0.99 will meet any cable test requirements. The TDR1000 has a simple selection option which together with a 4 way control switch offers an intuitive operation for the user.
An AUTO selection option ensures that the most effective parameters are selected depending on the range required, aiding rapid diagnosis of the TDR trace. Dual cursors allow complete flexibility, giving the operator full control and instant indication of distance between two points. A trace HOLD feature also allows comparison between conditions, something not seen on most other handheld TDRs. Extra high resolution together with white-light backlight and grey scale tones give the graphical display a vibrancy, aiding the user in identifying key events on the trace.
The TDR1000/3P is supplied with a fused test lead set (764-2831) ready to test CAT IV power circuits. A miniature clip test lead set to test telecom circuits is available separately (please see RS 764-2822)
Dual cursors providing instant indication of distance between two points
AUTO set up for instant use
Ultra fast pulse for near end fault identification
Trace HOLD feature to allow comparison between cables
IP54 rating offers real life working
Designed for use on all metallic cable pairs
Backlit graphics monochrome LCD (256 x 128)
Adjustable display contrast
Resolution to 0.1 m
For use on Telecom TNV-3 circuit, or 150V CAT IV power circuits
Power blocking filter not required
Environmental protection to IP54
Auto selected output impedance (between 25, 50, 75 and 100 Ω)
2 ns pulse for near end fault location
AUTO option selecting gain and pulse for each range
Display distance in metres or feet
Uses five AA (LR6) primary cells (supplied)随附5 x AA batteries, Hard carry case, fused test lead set, User guide CD